From November 30 till December 1, 2023, the international forum "Spatial development. The new digital reality" (BIFSD 2023) was held in Bishkek, at which specialists from KB "Panorama" presented the report "Digitalization of management based on GIS technologies "PANORAMA".
The event was organized by the Association of Institutions for Cadastral Valuation with the support of the Government of the Kyrgyz Republic. The forum covered issues of digital transformation in three key areas: geospatial data, sustainable development of territories, cadastral valuation of real estate objects. To exchange experiences and strengthen business ties, representatives of government agencies and business from Russia, the CIS, Turkey, and the Persian Gulf countries met at the event.
In their report, specialists of KB "Panorama" have shared their experience in implementing of corporate, regional and national geoinformation systems with use of GIS-technologies "Panorama".
The corporate GIS "Rosseti", created by order of PAO "Rosseti", provides information support when performing work to reduce the likelihood of accidents, technological violations and other emergency situations on electrical networks, as well as to mitigate their negative consequences.
The geoinformation subsystem created for OJCS "SUEK" provides control over the timely allocation of land plots, minimizing the risks of non-compliance with land legislation, monitoring the location of real estate objects within the boundaries of land plots, and optimizing financial costs during mining operations.
An example of a regional system built on serial products "Panorama" is the RGIS of the Ryazan region, designed for placement, storage, updating, analysis and presentation of spatial data received from various sources, in the interests of regional authorities and residents of the region.
The information system for maintaining the federal fund of spatial data (IS FFPD) automates the activities of maintaining the federal fund of spatial data, which contains spatial data and materials obtained as a result of geodetic and cartographic work organized by the state.
The main idea of the report is that geographic information systems of any level and complexity are effectively built on serial software, which significantly speeds up the development and implementation process. For example, RGIS of the Ryazan region was created on the basis of the software of the "Geoportal Region" complex, which includes server products - GIS Server, GIS WebServer SE, GIS WebService SE and the GIS "Panorama"GIS "Panorama" desktop application.
Photo materials are provided by the event organizers.
The annual all-Russian forum "Digital Russia. Technologies and investments into the future" was held in Ryazan from November 30th till December 1st, 2023. The event was opened by the Governor of the Ryazan Region, Pavel Viktorovich Malkov, with a report "Digital region: Social services for citizens". The forum gathered about 600 participants, and 54 industry experts were involved. The discussion was held in 5 areas.
As part of the panel discussion on the topic: "Use of RGIS in cadastral valuation and other industries. BIGDATA - analytics of the urban environment and digital tourism", a discussion of practical experience in operating RGIS of the Ryazan region was held. Minister of Digital Development, Information Technologies and Communications of the Ryazan Region Andrey Yuryevich Ulyanov noted that RGIS is actively developing and has become an important element of regional management. At the moment, more than 600 layers have been loaded in the RGIS RO built on serial "Panorama" products. The system is used by specialists from various departments to enter and analyze spatial data. Tishina Oksana Anatolyevna, director of the State Budgetary Institution of the Ryazan Region "GKO Center", in her report spoke about the use of RGIS RO for the purposes of state cadastral valuation.
Specialists from JSC KB "Panorama" took part in the discussion. Experience in using software solutions and technologies in industry solutions was presented. The reports "GIS in urban planning" and "GIS in nature management" were made by the head of the technical support service of JSC KB "Panorama" Demidenko Roman Albertovich. Leading programmer of JSC KB "Panorama", Vladimir Andreevich Zheleznyakov spoke about the possibilities of "Artificial intelligence in GIS". In the report "Technology of constructing geoportals", Denis Aleksandrovich Vitsko, system analyst at JSC KB Panorama, reflected the main capabilities and technical solutions used in the creation of geoportals. During the discussion of the reports, specialists from other regions were interested in the new capabilities of software solutions and the conditions for their integration into their existing systems and products. The director of the OGBU "Center for State Cadastral Valuation of Real Estate" (Irkutsk) in her speech spoke about the results of the trial operation of the FGIS Unified digital platform "National Spatial Data System" (FGIS UDP NSDS) in the Irkutsk region. According to her, the NSDS looks like an extremely promising solution that can be used in cadastral valuation, but some areas still need to be improved. During the discussion, specialists from the Kamchatka Territory spoke about their experience of entering data into the FGIS UDP NSDS. It turned out that specialists of cadastral valuation centers in various regions widely use the services "Public Cadastral Map" and "Unified Electronic Cartographic Basis", as well as the Federal Spatial Data Portal in their practical activities. In addition, data from public services with open spatial data is used, including those posted on the website gisinfo.ru in the GIS "Panorama" format.
In KB "Panorama" the "Workstation of cadastral engineer" version 15.1.1 has been developed. In the new version in modes the "Technical plan" (building, construction and other objects of real estate) possibility of selecting the version of "XML-scheme used to generate XML-document" has been added. The program supports XML-schemes TP_v06 and TP_v07_R03. There is a switch on the Options/XML tab to select version of XML-scheme. The TP_v07_R03 scheme was put into effect by order of Rosreestr dated September 6, 2023 No. P/0347 "On posting on the official website of the Federal Service for State Registration, Cadastre and Cartography on the Internet information and telecommunications network of an XML-scheme used to generate the technical plan of a building, construction, an unfinished construction object, premises, parking spaces, a single real estate complex in the form of an electronic document".
In the "Technical plan" dialog, the block of information about the cadastral engineer has been improved, new fields have been added: registration number (OGRNIP), name of the document. The position of executive has been added into the information about customers. The composition of the source data fields has been expanded, the code of coordinate system, the type of geodetic network, and the factory number of the measuring instrument have been added. When recording information in XML, the obsolete FlatsEGRN and CarParkingSpaces elements have been removed. In the element describing the address of the property, the positions OKATO, KLADR, OKTMO have been removed. A new section "Information about cultural heritage objects" has been added. When recording information about the area of a real estate property, a calculation of the error in determining the area has been added. The recording of the characteristics of premises and parking spaces located in the building has been improved.
In the "Correction of registry errors" mode, the algorithm for inserting into the report information about the coordinates of corrected cadastral objects (sites, OKSs and parts) has been changed. Previously, a presence on a map of two objects with identical cadastral number (an object according to the EGRN and a corrected object) was required. And if there was no object according to the EGRN, then the information was not inserted into the report. However, there are objects registered in the EGRN without a coordinate description of their boundaries. The modified algorithm allows you to analyze only one object - the corrected one. If there is no object according to the EGRN, dashes are inserted into the column "Coordinate values in EGRN".
The new version of the program is available on the website in the Download section.
In KB "Panorama" the GIS "Panorama"version 15.1.1 has been developed. In the new version, the tools for terrain analysis, thematic mapping and design of special maps with complex conventional symbols have been expanded, tasks from the "Well calculations" group of the Complex of geological tasks, "Calculating bulks of earth works" from the "Complex of 3D analysis" have been improved. In the "Technical plan" task, the formation of an electronic document using the XML schema TP_v07.xsd has been added in accordance with Rosreestr order No. P/0347 dated 09/06/2023.
To improve the clarity of the analysis of the relative positioning of various groups of objects, the "Lists of objects" dialog has been improved. Ability has been added to display lists of objects formed by various requests using custom styles (conventional symbols). Tools in the "Search" and "Building" tabs allow you to perform requests onto selection of objects into new lists or perform spatial overlay operations and constructions to generate new lists of objects. Lists of objects can be displayed as independent sets of data in a given sequence among other types of data: vector maps, area images, geoportals, databases and other information. The order in which lists of objects are displayed among the open data of the document is set in the Map Legend task on the "General data list" tab. By default, object lists are displayed on top of all document data. In the "Lists of objects" dialog, custom styles are automatically formed for the selected lists of objects. Enabling and disabling the visibility of custom symbols of the selected list is carried out by clicking the left mouse button in the display area of the corresponding icon. To enable or disable the display of all custom symbols, you must set the "Enable display of custom styles" mode. Custom styles represent a set of conventional symbols for polygons, contours and point symbols. Assigning and editing custom styles is carried out by means of the "Assign custom style" mode. To make settings easier, you can only change the color of conventional symbols included in a given list. In the "Edit styles" dialog, you can customize general views of symbols for the list by localization in the standard dialogs: "Point sign editing", ","Vector sign editing", and "Line/polygon image parameters". Style sets can be combined into themes. The following modes are available for editing styles: "Copy style", "Copy view to clipboard", "Paste view from clipboard", "Clear view". Descriptions of custom styles are stored in the directory c:\Users\Public\Documents\Panorama\styles\.
Dialog of vector sign editing has been improved. When applying sign elements, control has been added for elements entering the negative region of the sign coordinate system. When an element exit is detected, the sign is automatically shifted to the positive area, including anchoring and dimension lines. There are added a saving and restoring cell size and background color set by the user. The construction of a circle using three points and drawing support contours when drawing a circle based on three points, arc and curvilinear elements have been clarified.
Into the main menu of the application the item "Options - Title scaling" was added with the possibility to choose mode of the title displaying: Simple, Proportional and Proportional with narrow spaces. The Simple title display mode is intended for quick drawing of titles. When you select proportional display, drawing titles at different map scales is done in proportion to the change in map scale. When selecting the display mode with narrow spaces, spaces are automatically narrowed after numeric characters and punctuation characters. The latter mode is commonly used when publishing a map to reduce the width of titles containing spaces.
Display of a combination symbols line has been improved. The combination symbols line allows to form complex types of contours design of linear and areal objects. A line can contain strokes, spaces, font characters and vector elements, typed in any order. In the new version a placing the elements on sharp turns of contours has been improved, quality of formation of samples of the objects used for the map design legend during publication has been increased. On topographic maps, combination symbols line are used to designate the boundaries of administrative divisions, tram and railway tracks, dams and shafts, cliffs, embankments and excavations, underground and underwater gas and oil pipelines. On maps of territorial planning - when designing public transport lines, overpasses, security, sanitary and coastal zones, engineering structures for protection against flooding and hazardous geological processes. On military maps - when drawing lines of boundaries, borders and special-purpose zones. On forestry maps - when drawing the boundaries of forestry territories and forestry enterprises, protective zones and special-purpose strips.
"Map Editor" task has been improved. When creating a point object, the ability to snap to peaks on the DEM has been added. After activating the mode, the cursor, when moving, is "attracted" to the point with the maximum absolute height within the analyzed area. The height is determined by analyzing the corresponding section of the matrix of relief heights. The mode allows you to accurately put a point onto the top of a mountain and can be useful for marking elevations when forming a plan-elevation base of the map. When an object is recorded onto the map, the absolute height value is written into its H coordinate. The mode "Graphic objects - Create polygon/line - Image parameters" has been improved. The possibilities for creating the view of graphic object have been expanded. Selection of translucent line type (Line - colored glass) has been added. To customize the view of a shaded areal object, a parameter has been added - shading offset, which allows you to use the overlay of two or more shaded views with different shading offsets.
The task "Calculating bulks of earth works", which is part of the "Complex of 3D analysis", has been improved. The task determines the bulks of earth masses to be moved within a local area and also forms a work plan in the form of a user map. The new version of the task, in addition to matrixes of heights (MTW), allows to use relief models represented by a point cloud (MTD). The need for the user to customize object types to plot a work plan onto a user map is eliminated. The plan of earth works is drawn onto the map by graphical objects. "Complex of 3D analysis" is intended for creating surface models and solving tasks of spatial analysis using the constructed models.
In the "Well calculations" panel of the Complex of geological tasks the mode "Build of intersection layers" has been improved. The mode is intended for mapping point objects describing the spatial position of the points of intersection of the wellbore axis and a sole of geological layers. When constructing intersection points, data from opened geological layers is used, prepared by the modes "Drawing of points borehole" and "Viewing and editing of attributes of borehole". Determination of the spatial position of the wellbore axis is carried out using inclinometry. Ability to map intersection points using data of CSV file has been added. In this case, the input data of the mode will be: a point object «Wellhead», a linear object with a 3D metric «Wellbore», a CSV file containing depth marks of the top and bottom of the layers. The complex of geological tasks is intended for processing the results of engineering geological surveys, preparing and forming drawings of engineering geological columns and sections, modeling the relief, geological structure and hydrogeological conditions, calculating volumes and creating plans of earthworks.
Formation of an electronic document using the XML schema TP_v07.xsd has been added into the "Technical plan" task in accordance with Rosreestr order № P/0347 dated September 6, 2023. The scheme is intended for creating an XML file - a technical plan of a building (including an apartment building), structure, unfinished construction site, premises, parking space in order to ensure state cadastral registration of a real estate property, or state cadastral registration of real estate and state registration of rights to real estate and transactions with it. The new scheme has updated sections: general information about cadastral work and initial data. For buildings, apartment buildings, structures and premises, the "Cultural heritage object" section has been added. When recording the area of a property, an error calculation has been added. A record of information about all premises/parking spaces located in a building or structure has been added to the packages "Changing information about a building" and "Changing information about a structure".
The new version of the program is available for download on the Download page.
Geoportal "Bank of spatial data" has been supplemented with a map of the Republic of Zimbabwe, formed according to OpenStreetMap data. To work with the map, you can use the GIS Panorama Mini program or other software products of KB "Panorama".
The map was led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m). Publishing of updates in bank of spatial data is made by using the program of Databank of digital maps and remote sensing data. Publishing contents of bank of spatial data on the geoportal and data access for downloading are implemented by means of GIS WebServer SE.
Free maps on the basis of OpenStreetMap data are available for download on the page "Digital maps".