In KB "Panorama" the Complex for preparing aeronautical information documents version 8.2.4 under the control of the GIS "Panorama" or GIS "Operator" has been developed. In the new version, in the "Input airports and heliports to database" dialog, the ability to maintain a database of vertical boundaries of route sections in two measurement systems (for example, feet and meters) has been implemented. The mode allows you to expand the filling of the aeronautical database of the complex with information contained in the AIP of the Russian Federation (Part II Route (ENR)).

The "Output of prohibited, danger and restriction zones" dialog has been improved. When mapping international and domestic air routes, area navigation routes, local air routes, a mode has been added that allows you to generate an object signature taking into account the values of the upper and lower boundaries of route sections in flight levels (FL), feet, meters, feet and meters.

The complex of preparing documents of aeronautical information is a set of tools for maintaining an aeronautical data base, a modeling and analyzing the aeronautical situation, generating aeronautical maps and exchanging data with other information systems through export and import in the ARINC 424-19 exchange format and export in the AIXM 5.1 format. The task "Flight procedures design" is used to design the routes of departure, approach and landing and to analyze the safety of flights on them. The task "Assessment of compliance for aerodromes with the requirements FAR" is intended for the analysis of the aerodrome and the aerodrome environs for the suitability for operation and aircraft flights in accordance with the Federal Aviation Regulations.

The new version of the program, examples of aeronautical information documents, operational documentation, video lessons and presentations are available for download on the Download page.

Geoportal "Bank of spatial data" has been supplemented with a map of the Republic of Mali, formed according to OpenStreetMap data. To work with the map, you can use the GIS Panorama Mini program or other software products of KB "Panorama".

The map was led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m). Publishing of updates in bank of spatial data is made by using the program of Databank of digital maps and remote sensing data.

Publishing contents of bank of spatial data on the geoportal and data access for downloading are implemented by means of GIS WebServer SE.

Free maps on the basis of OpenStreetMap data are available for download on the page "Digital maps".

In KB "Panorama" the GIS ToolKit Active version 15.0.0 has been developed for creating geoinformation systems with a free license in any programming environment that supports ActiveX technology, for example, Visual Studio, 1C8. The new version increases the speed of performing the search and analytical operations on geodata by using the functions of the updated GIS core.

The component for connecting geoportals (axMapWMSPopupDialog) has been improved. The speed of loading and displaying tiles has been increased. The GIS core automatically evaluates the computer parameters: the number of cores, the size of the RAM, the bandwidth of the data transmission channel. Taking into account the performance of the system, a pool of independent threads is formed to load, process and display the received data. Multi-threaded data loading reduces delays when moving the screen, scaling the map, and performing spatial queries to the geoportal. For example, for a network with a bandwidth of 100 Mbps on a 4-core processor with a clock frequency of 3.5 GHz, the speed of displaying tiles from the KB "Panorama" geoportal increased 6 times, and the time to receive them decreased from 500ms to 70ms.

The access component to the map objects classifier file (axMapRsc) has been improved. On the "Objects" and "Semantics" tabs, the ability to filter/search by all characteristics at once (name, code, key, number/guide) has been added. This search type is set by default. When you select a found object, the background color highlights the line of the characteristic by which the object was found. If the characteristic value completely matches the search string, the background color becomes light green, if incomplete - becomes yellow. A list has been added to the search line, in which the typed strings of effective search are saved. Selecting a line from the list makes it possible, if necessary, to quickly return to the previous search and its results.

There is added the ability to assign to several signatures the attribute of specifying the size of the sign according to the length of the signature, as well as assigning the attribute of prohibiting/allowing stretching to elements. It allows you to expand some of the elements of a vector sign (for example, automatically stretch the sign frame around long signatures), and shift the remaining elements (design elements: circles, squares, rhombuses). The shifted elements can be located both inside and outside the sign frame. To assign a no-stretching attribute to an element, select an areal or linear element of the sign and click the "Do not stretch the element when specifying the size of the sign" button.

The modes have been added into the "Clusters" tab: creating a new cluster's sign by copying the selected one, copying a cluster sign from another classifier via the clipboard. The cluster sign is used to display densely spaced point symbols of the same view of objects with a common sign. The tab selects the views of objects related to each type of cluster, the cell sizes vertically and horizontally, the semantics code for specifying the current number of objects in the cluster, the view of cluster symbol, the limiting percentage of increasing the size of the cluster symbol and the limiting number of objects corresponding to the maximum size of the symbol cluster. When copying a cluster's sign from one classifier to another, it is necessary to re-assign the views of objects related to this cluster.

The axMapObj component has been improved. In the object selection dialog, which is called using the ShowDialogInfo method, a processing of "hot" keys for the "Next" (Ctrl + ">") and "Back" (Ctrl + "<") buttons has been added, the "Number of semantics" field has been placed under the table. In the "Metrics" tab, saving and restoring the expanded view of the object scheme has been added, and the ergonomics of the explanatory inscriptions of profile heights for objects containing 3D metrics has been improved. The functionality of the "All object in window" button has been expanded. If the main contour (0) was selected before clicking the "All object in window" button, the map is scaled so that the selected object occupies the maximum area of the window. If any other contour was selected, then the map is scaled according to the dimensions of the selected contour (subobject).

An example of using GIS ToolKit Active components for the 1C:Enterprise platform version no lower than 8.3.20 has been developed. The example demonstrates working with a local map, with a map opened over a network (including the Internet), searching for map objects by a set of attributes, creating and editing metrics of map objects.

GIS ToolKit Active contains a set of visual and non-visual components, allowing to use the spatial and attributive data for display and execution of special calculations. With use of these components the geoinformation systems of various level (federal, regional, municipal, corporate) are created. The toolkit includes support for local, national and international coordinate systems (parameters for more than 4,000 different coordinate systems are included into the package). The extensive Bank of geospatial data is accessible for the toolkit use.

The new version of the program is available for download on the Download page.

In KB "Panorama" the "Workstation of geologist" versions 15.1.0 has been developed. In the new version of the program the mode "Construction of engineering-geological profiles in the form of the scheme" as a part of the Geological editor has been improved. The mode provides creation of the scheme of an engineering-geological cut in the form of a user map. The initial data for creating a scheme of a geological cut are point objects - wellheads, a line of a cut and relief elevation matrix. The program uses three-dimensional metrics of a line of a cut to construct the ground level. Next, it analyzes the semantics of wellheads to obtain information about the composition of the exposed layers and the level of occurrence of their roof and base. The obtained data is interpolated along a cut line to the right and to the left up to the middle of the segment between two wells.

In the updated version of the program, the use of models of a relief has been added to improve the visualization of the scheme and facilitate its editing. If there is an open model of a relief (matrix of heights, matrix of layers, TIN model, point cloud), the creation of a scheme is carried out taking into account the absolute heights of the terrain relief. The ground surface line and borehole layers are put onto the scheme in accordance with the heights requested along the line of geological cut with a given step. In the absence of the model of a relief, the layers of wells are put onto the scheme using rectangular objects. Means of adjustment of parametres of the created scheme are finished, the list of scales of a scale of depths and a scale of lengths is expanded.

The modes of the "Raster Editor" task for raster location by 1 or 2 points have been improved. Ability has been added to select a raster point by taking coordinates from a map object. To do this, the "Take another point" and "Take another line" items are built into the context menu of the modes. Also, setting a new position of the specified raster point can be done using the context menu item "Input point coordinates from keyboard". Raster binding modes are called up using the context menu of the "Rasters" tab in the "Data list" (menu View - Rasters list) and "Map Legend" (Tools - Map Legend menu) dialogs, as well as the corresponding buttons in the "Work with raster" auxiliary panel of "Raster Editor" task.

The "Classifier Editor" task has been improved. On the "Objects" and "Semantics" tabs, the ability to filter/search by all characteristics at once (name, code, key, number/guide) has been added. The display of the vector sign has been improved. Ability has been added to unload a background image (png, jpg, bmp), which allows you to apply vector signs by a raster sample. The raster sample is displayed with the selected degree of intensity and can be adjusted to a convenient size. When placing a sign on a map the sign is disproportionately stretched to its overall dimensions.

The new version of the program is available in the Download section.

In KB "Panorama" the GIS WebService SE version 15.5.1 has been developed. In the new version a loading of data from formats SXF, TXF, KML, SHP, MIF has been added. The service publishes the downloaded data as user layers. With these layers it is possible to work as with a map: to perform overlay operations, to view and edit the information, to carry out search of objects and to perform other requests. For example, select on the layer only those objects that intersect or come into contact with specially protected territories. New possibilities of service allow together with the Databank of digital maps and remote sensing data to create a cross-platform system of storing and updating of spatial data with the automated formation of geo-coverings.

The program has expanded the ability to search of objects. End-to-end search functions have been added to allow additional filtering of response results. A request to search for objects by the value of arbitrary semantics has been implemented. There are added the requests for working with lists of objects: checking intersections between groups of objects of different layers using filters; search of objects between two lists, the distance between which satisfies the search conditions; search of objects that begin/end in the first list. The selection of objects according to the list of identifiers with the use of other filters by semantics and metrics has been implemented. Ability has been added to sort the results of the response.

The service administrator has been improved. For Linux systems, the ability to stop and start the service has been added. The customization of the metadata file of the WPS service has been implemented. Archiving and restoration of copies of configuration files from the administrator have been added. The display of layers in the service administrator has been accelerated when displaying tens of thousands of published data.

GIS WebService SE supports all international standards (OGC WFS, WFS-T, WMS, WMTS, WCS, WPS), which are used to transmit and display spatial data. The program has the ability to display tiles using any user or local coordinate system. The application is implemented on Windows and Linux platforms and is compatible with Apache, IIS and nginx web servers.

The new version of the program and documentation are posted on the website in the Download section.