| Products | | | Tehnology | | | Download | | | Price | | | Forum | | | Items | | | Education | | | Contact | | | About |
 |
 |
 |
|
||||||||||||||||||||||
| GIS and Geoinformation technology. Geodesy. Kartography. Navigation. | rus | eng | ukr | blg | |||||||||||||||||||||
|
|
|||||||||||||||||||||
 |
|||
| What's new in the last version of GIS Map 2011 | |||
|
01.02.12 Version 11.8.4 2). The task "GPS-monitor" is improved.
Support of the proprietary protocol is included into the task "GPS-monitor" for connection to the software product "Interface software GEO-RTK", developed by the Russian Institute of Radionavigation and Time (RIRT) to control the navigation equipment.
The mode of displaying satellites "Almanac" is improved at joint work on systems of GPS and GLONASS.
Satellites on the "Almanac" bookmark are displayed in different colors: satellites GPS - blue, satellites GLONASS - red.
Shades of displayed satellites depend on their participation in definition of coordinates of a point by the following categories: 3). Into the task of the checking a report of objects on adjacent sheets the parameter is added - distance of objects from a frame within which objects participate in a report. 4). By pressing a combination of keys Alt+Enter the window of a map opens to full screen. By repeated pressing - it is restored back. 5). At creating maps of cylindrical projections the ability is added to enter the standard nomenclature of the international rule with automatic calculation of geographical and rectangular coordinates of frames.
2). The task of automatic correction of the objects metrics is improved. At checking the islands location of polygon subobjects (internal contours) into objects there is added ability to transform contours, located outside of the basic contour, into separate objects with union of such contours in group object (for automation of collaborative editing - moving, deleting, searching). 3). Into dialog the Data List of maps in the Rasters bookmark there is added the mode "Optimization of the list of rasters". The mode is started via the Properties menu and item "Optimization" at the selected tree branch "Rasters". The mode is intended for stream processing of the rasters that make up the document, and allows to compress the image of rasters by algorithms JPEG or LZW. In the Matrix bookmark the similar mode "Optimization of the list of matrixes" is supported, which has been added earlier for stream processing of matrixes of the heights which are a part of the map document. 4). Map Legend task is modified. There is added ability to enable or disable the visibility of individual maps, matrixes, and rasters, or a list of data contained in the selected group of tree of maps, matrixes or rasters.
2). Map Editor is improved.
The mode of creation of subobjects by selected area objects (polygons) is updated. Earlier the mode cut the subobjects by the selected objects without taking into account the location of objects relative to each other (touching or crossed subobjects were created). New realization of the mode by selected objects: 3). Storage of rasters in RSW format is improved. There is added the second level of storage of the reduced copy of the image for acceleration of display. The first level contains the image compressed in 4 times, the second - in 16 times. 4). Into filters of opened rasters the extensions *.jpeg and *.tiff are added. 5). Into the control of objects junction over borders of adjacent sheets there is added the opportunity of exception from processing the service semantics (the junction is carried out at coincidence of semantics of objects) and the objects specified by the user in service file MapAdjust.lst (for example, lines of coordinate grids). 6). In settings of conventional symbols of the vector objects containing the titles for semantics of object of type the classifier, there is added the opportunity to select a full name of value from the classifier of semantics or the reduced name.
2). Support of RSW format with compression of blocks by algorithm JPEG is added . The compression ratio can be selected by the user through a dialog Rasters list\Properties\Optimization. In item the Mode of processing of raster it is necessary to specify Compression JPEG. RSW files with JPEG compression will not be supported by previous versions of the GIS. It is recommended to use compression JPEG to placement of raster coverage of district (space and air photography) on the GIS Server 2011. When you choose the compression level of 60% the amount of transmitted data is reduced by 10 times at saving the visual quality of color photographs of district without appreciable differences from initial data. Together with new technology of caching the rasters on the client an access to rasters by speed will be not below, than for modern web-servers. 3). The task " Absolute heights control " is modified, that checks a correctness of objects of a vector map's relief. Checking a correctness of heights values of a relief's objects is carried out by a method of horizontal and vertical profiling of vector map during which unacceptable differences in height are detected. 4). In dialog Run application the search of a task by any part of the task name is added to speed up a choice of the necessary item of the menu. After opening a dialog it is enough to press CTRL-F, to enter a part of the task name and to press Enter. 5). The task of quality check of vector maps is improved. Diagnostics of the control of self-crossings is expanded. There is added control of closeness of contours and the control of double points of a contour in the specified tolerance . Earlier only absolute coincidence of coordinates was supervised.
2). Added ability to automatically search a site of district on the site OpenStreetMap.org via the menu item View\External resources. 3). Into the list of applications there is added the task Transformation of raster on a framework of nomenclature sheet of a map. For simplification of transformation of the scanned maps-materials. 4). New converter from Shape format is developed. There are expanded means of customizing external view and attributes of objects, projection parameters of created maps.
2). For the rasters opened on the GIS Server 2011, support of caching data on the client is added, that significantly speeds up the display and re-opening of data. For support of caching data it is necessary to provide a sufficient free space on a disk where the data cache is placed. The choice of a folder for placing the cached data is done via the menu Options\Data location. 3). Into group of applications Import/Export the new task "Converter of cadastral data from CAD/ZEM" is added. The task is intended for import of files from exchange formats by cadastral data CAD/ZEM into the internal format of the GIS Map 2011. Cadastral data in CAD/ZEM format are presented as ASCII text files containing the metric and semantic information. The metric information is downloaded onto the user map. Semantic information is stored into database tables of format DBF. Filenames of DBF tables and names of fields correspond to names of tables and fields in the files CAD/ZEM. In the directory with database files the file of the database project is created, in which all created tables and interrelation between them register. The task can handle ZEM files of version 2.0 and higher and CAD files of version 4.0 and higher, used at conducting the State Cadastre of Bulgaria.
2). In the task GPS monitor into the list of connected navigation devices the string NOVATEL is added, which is responsible for processing the relevant range of devices. The task was tested on the equipment: a cable USB (A)-USB (B), antenna Tallysman 32-2400-1, single-frequency receiver phase GNSS SFR013GG. The device is connected to USB-port of a computer, the driver of the device creates three virtual COM-ports, at opening one of them, the program sends the device a number of commands for its initialization. Further work is being done in normal mode.
2) Complex of geodesy tasks is improved. The new mode is developed "Print DRAFT Land surveying". Mode provides the formation of the document in accordance with the Ministry of Economic Development Order ¹ 388 from 03.08.2011, including: 3). Interface for the task Data Base is improved. The list of data sources is formed and displayed in the form of a hierarchical tree which provides an opportunity of convenient navigation on all levels of a structural tree, clarity and simplicity in creating the project. The mode of Link of a map object for all sources of data is modified, the documentation is updated. Structure of XML file of a database project is updated. Updating the old structure is carried out automatically. 4). Converter to the format Shape is improved to ensure the export of the metrics of objects with three-dimensional coordinates.
2). For the maps of district storing coordinates of objects in geodetic system of coordinates, support of building splines and zones in geodetic coordinates is added. 3). At changing the parameters of a displayed projection now we save the binding of rasters, matrixes, insets of maps and OLE-documents according to their geodetic coordinates. 4). Converter in format Shape is improved to ensure automatic import and export of data in format SHP.
2). Map Editor task is improved. For an ensuring of more reliable operation mode of the map editor "Cut out a piece of map inside /outside of a contour" these modes perform the automatic check of objects over self-crossings for objects which fall on border of a cutting. In connection with acceleration of algorithm of the checking the self-crossings the modes "Cut out inside /outside of a contour" also are essentially accelerated.
2). Interface of the task Classifier Editor is improved. The size of lists of layers, objects, semantics and the table of conventional symbols of objects is increased. 3). There is added opportunity of automatic searching a site of district on Yandex.maps through the menu item View\External Resources. 4). Modes of preparation of the land-management documentation are updated at surveying and construction of routes of overhead power lines. The task «Land-plan» provides formation of documents in an electronic form on the multiplanimetric ground areas, under the transmission towers. As a result of working the task the textual report is formed with graphic elements and XML file for registration of the ground area to the account in an electronic form. The task "Building a profile of a linear construction ", provides formation of the plan of the route's longitudinal profile according to requirements "Guide to find routes of overhead power lines 35 - 1150 kW". At formation of a profile the data presented on a topographical map or the large-scale plan are used. As a result of work there will be formed the profile of absolute heights, stationing, the drawing a section of district along an axis of the route, the numbering and quantitative characteristics of pickets. The profile can be added by the drawing stamps of the various form and contents. 5). Location of the file Panorama.ini is changed. Instead of "\Application Data\Panorama.ini" the location "\Application Data\Panorama\Panorama.ini" is chosen. Changes have been made for an ensuring a compatibility with means of data protection.
2). Depression of horizontals the task is developed for automatic generalization of a relief by preparation of maps of the open using. The complete set of functions of generalization is included into the task the Automated generalization of topographic maps. 3). The task Map Editor is improved. In the mode of editing the titles it is possible to choose the vector sign containing in designing of a sign the title, and immediately to make changes to the text. Earlier editing of the text of a vector sign was carried out only in semantics of object.
2). In the general check of vector map's quality there is increased value of an admissible divergence of objects coordinates and a sheet frame line up to 0.01 mm in scale of a map. That allows to compensate a deviation of the frame sides from real position of arches of parallels and meridians and to carry out an exact report of objects of adjacent sheets up to 0.000001 m on district.
2). Formation of reports for the tasks group of the geodesy editor "Land-plan" is improved. Into the mode "Formation of LAND-PLAN" there is added the possibility of forming one XML-file for group of allocated objects. This method is used at formation of the land-plan in case of partitioning the ground area onto a few new ones. 3). Converter into DXF format is improved. The ability of forming a layer name of DXF by RSC layer name and by the RSC object name is added. Also formation of a layer name and formation of the multiline title is corrected at a unloading the drawing in Unicode, the unloading the titles containing inadmissible characters is corrected. 4). The task of allocation of dot signs along contours of the marked objects is improved. Ability to turn dot signs onto specified angle is added. 5). The task Map Editor is improved. There are updated the modes of performing overlay operations: Cut out a piece of map inside and outside of a contour (group "Delete"), Move object to selected map with a cutting by the chosen object (group "Create"), Copy marked objects onto other map with a cutting by the chosen object (group "Mark") - at a cutting the objects the account of subobjects is added into a pattern. 6). The task Map Print is improved. At preliminary viewing a breadboard model of a print with split onto sheets you may move the map image on sheets for specification of position of the printed image. The range of scaling a map is extended: 2 %, 5 %. The new mode Select area by pages size is added.
2). At opening the data from GIS Server the group operations of a choice of opened data are supported.
2). Displaying multispectral images TIFF (GeoTiff) together with other types of spatial data in the document with the ability to manipulate the displayed channels is added. Setting the display of multispectral images is performed in a dialog "Channels of a multispectral image" which is called from dialog "Data list of maps" on a bookmark "Rasters" by clicking button "Properties". 3). There is added the task of transformation of raster image RSW in corners of a frame of a nomenclature map sheet. Transformation of the image is carried out by a method of a nonlinear rubber sheet. Start of the task is carried out on a bookmark "Rasters" of dialog "Data list of map" when you click "Properties" button. 4). The analysis of tags of a geospatial placing is added at import of raster data of format MrSID (SID, JPEG2000, NITF) into internal format RSW. 5). Improved task of forming a matrix of qualities, part of the complex of 3D-analysis. Implemented a new method of modeling the surface - the method of Kriging. 6). Task "Print maps in small scale" is modified: 7). Modes of forming the reports of group of tasks of the geodetic editor "Land-plan" are modified: 8). Improved task "Formation of map sheets by coordinates", started from the list of applications: the error of formation of double sheet of digital topographic map of scale 1 : 200 000 is corrected. 9). The task Check of vector map quality is modified: in the program of the "control of objects joining" there is reduced the number of erroneous messages about error of the objects mismatching going onto frame and at presence of nearby points (entering in the tolerance) of checked objects. 10). The mode "To add insertion in the document in interactive mode" is added. Having specified dimensions of a formed insertion on a map and the dimensions of displayed area on a map-source, the program automatically calculates scale of insertion and its position. The button of starting the mode can be added into the user panel in dialog "Toolbars customizer" (Main menu - Tools - Custom Panels - Customize...) from a set of modes "Map 2011", from the available toolbars "Minor panel".
1). The task "Import from DXF format" is modified. Support of importing the attributive data in UTF-8 coding is added, the error of defining parameters of connection to a database in files of format DXF higher than 14 versions is corrected, corrected saving the settings of conformity of fields names of the database table at loading objects with parameter "By database" - " From table records". 2). Task "Import data from format MicroStation (dgn)" is modified. Support of loading objects by attributive data is improved. Customizing attributive data allows to load simultaneously different types of objects in one layer by various classification codes. 3). Task Map Computer is modified. In dialog of the terrain profile the ability is added for Customizing vertical step of heights scale up to centimeters. Mode of building a circle visibility range is added. In the mode "Absolute height" into new dialog the values of height in a point for all open matrixes are shown. 4). Task Print maps in small scale is modified. The opportunity is added to set any scale of displaying a map or to choose scale from the list. Recalculation of dimensions of all region is corrected at enabling and disabling the decoration frame. The scale of a print is entered without selection of scale from the list of standard scales. After closing the dialog "Print map" is stored the mode of displayings (Scheme/Map). 1). In the task Search by area there is added the mode of search of the objects located completely outside of specified area. Earlier there were modes for search of objects completely inside of area, inside with crossing area and search of the objects distant from area on the specified distance. 2). Means of selecting objects on a map are modified - Select the specified and Select by a conventional symbol for their joint application. The user can select on a map all objects having the chosen view (conventional symbol) and to add separate copies of other view or to exclude separate copies. Possibly to operate in other sequence - to select separate copies of objects and to add to them objects of the chosen view. The any combination of the specified operations in any sequence is allowed. The repeated choice of object excludes this copy or this view (depending on current operation) from the list of the marked objects. Above the marked objects various group operations of editing and the analysis are carried out. 3). Converter from format Shape (SHP) is modified. The opportunity to import attributive data, which values are set by the classifier (directory) by a symbolical code is added. Earlier such attributes were set only by a numerical code or were passed in the decoded kind. The field to customize conformity of a symbolical code in DBF field and the classifier of a map the Key field is applied in dialog Editing classifier of semantics in the task the Classifier Editor. 4). The task of Quality control of digital topographic maps in SXF format is modified. Displaying statistics of errors is corrected, the scheme of control's parameters is specified, displaying the control sum of SXF in a hexadecimal kind is added, calculation of run-time of the control for all data is added. 5). Converters for format MIF \MID are modified. Support of default delimiter in the form of a symbol of tabulation is added, when field Delimiter is not set in MIF file. During formation of MIF\MID into the list for a choice of a delimiter the symbol of tabulation is added. 6). The maximal total amount of simultaneously processed vector maps is increased. The volume of attributive data and coordinates of the objects displayed in structure of one document on any number of maps can be more than 10 GB. Additionally with vector data now tens of gigabytes of rasters and matrixes can simultaneously be processed. It is checked up on volumes of about 25 GB on a platform x32. 7). In the task "Construction of thematic cartograms" there is added the processing of initial data from text files in addition to files DBF and tables of databases. It simplifies processing the various thematic data saved from tables of MS Excel. For reading text files it is necessary to set kind of splitter in a text string, to enable the option "Header" and to set the coding (ASCII DOS, ANSI Windows, UTF8). Header option allows to display the names of columns, saved from tables of MS Excel. 1). Import of vector data from SXF format, prepared in older programs versions (7.õ - 9.õ), is modified. For maps of scales 1:25 000 and smaller the automatic rounding the coordinates up to centimeters, except for points entering the frame, is carried out. It allows to keep the topology of objects at transition from conventional coordinates in discretes to real coordinates in meters. 2). The new task of quality control of digital topographical maps in format SXF is developed. The program processes all SXF files which has been written down into the chosen folder, creates for each SXF file the detailed report in format of MS Word, containing statistics of errors for each kind of the control and the control parameters. Parameters of the control in advance are stored in the scheme of control. The program of the control is installed as the additional application to the GIS "Map 2011" or "Panorama-Editor" of version 11. 3). For convenience of viewing errors of matching objects in the dialog Select object there is added an automatic positioning in the list of points coordinates onto the point chosen on a map. 4). Converter in format DXF is modified. The opportunity to save text data and attributes of objects encoded in UNICODE (UTF-8) for support of national languages is added. 5). Support of local coordinate system on the basis of CS-63 for rasters and matrixes is added. 6). The task Print maps in smaller edition is modified. Choice and editing of rectangular area mode is added. Ability to set the user scale is added. The mode Splitting to printed pages is modified. 7). The complex of geodetic tasks is modified. In the mode "Automatic filling the semantics of selected objects" the opportunity to insert additional spaces for alignment of semantics including a serial number, is added. Use of additional spaces provides the correct sorting of a set of sites by names. 1). The new task Print maps in small edition is developed. In the task of a print preliminary viewing the document prepared for printing is realized. The document can contain vector maps, rasters, matrixes, insets of other maps, embedded office documents, tables, graphic images. This mode helps to determine how the map will be displayed on the print, that will allow to identify minor faults and immediately to correct them. In a mode it is possible to see on the screen one or more pages of the chosen printed area of a map depending on the chosen method of splitting: Split to pages, Stretch to page, Accord page. By means of a tooling it is possible to send the document to print, to open a window with print settings, to set margins, offset, overlapping, orientation of a sheet and another. For alignment of the map image on page it is possible to use graphic elements of the user interface. 2). Support of entering and editing on a map of titles texts and values of objects attributes in UNICODE format for creation of maps on any national languages is provided. If the entered text contains latin characters from 0x0001 up to 0x007E or Cyrillic (0x0400 - 0x045F) and on a computer the Russian Windows is installed (OEM 866 or 1251), the text will automatically be written in ANSI, otherwise new value will be saved in UTF-16. Names of layers, objects and semantic characteristics in the classifier of a map are stored in coding UNICODE automatically. 3). The task "Import rasters from servers OGC WMS" is considerably modified. Support of WMS protocols of versions 1.3.0, 1.1.1 and 1.1.0 on the basis of standard OGS Web MapService Interface is improved. The opportunity of a choice of loaded area on a map and by coordinates, automatic selection of more detailed information is added. The obtained data and associated metadata automatically are imported to a format of the GIS that allows to display, edit and combine them with vector maps, matrixes of heights, raster or other data, to print and save in other formats. 4). Realization of Mercator projection for reference system EPSG:3395 (World Mercator) is refined 5). At transformation of vector maps, rasters and matrixes the opportunity of filling the parameters of a projection and datum in the passport of a map by EPSG code of reference system (Projected CRS) is added. 6). Converter from Shape (SHP) format is modified. The opportunity to import attributive data in coding UTF-8 is added. 7). At creating maps of type UTM NAD 27 and UTM WGS 84 (GRS 80) the property Coordinate Y without number of a zone, for compatibility with the standard formats of coordinates is added. New property is added also for parameters of rasters and matrixes. 8). In the task "Navigator 3D" is modified a mode of movement on object. Smoothness of displaying model is increased at movement and turns. 9). The maximal total amount of simultaneously processed rasters and matrixes is increased - up to several tens of gigabytes in several thousand files. 29.03.11 Version 11.4.4 2). Converter in MIF \MID format is modified. At converting semantics the opportunity to unite value of fields of repeated characteristics in one field through the chosen divider is added. For example, at converting the graph of roads the lists of arches numbers onto which transition from a current arch (interdictions of turns) is forbidden can be united in one field through a divider. 3). Converter from format Shape (SHP) is modified. The opportunity to import several layers (files SHP) on uniform parameters of conformity of fields names and codes of semantics is added. Earlier for each layer the individual parameters were necessarily formed. 4). Complex of geodetic tasks is modified. The automated method of filling of the land-plan for a case of formation{education} of the multiplanimetric ground area from structure of common land is realized. Into one report data are automatically inserted about created contours of a multicontoured plot, contours of the changed plot and the sections excluded from structure of common land. Filling of a new section "Scheme of location of object borders of land use" is added, at formation of a map-plan of object of land management. At formation of the summary report by the selected objects the opportunity of processing linear and dot objects is added. 5). At import of matrixes of qualitative characteristics of district from TXT format a stream processing of all files in the chosen folder is supported. 16.03.11 Version 11.4.3 2). The opportunity is added at creation of a map to choose parameters of projection, datum and spheroid from lists of parameters in XML format. 3). At transformation of a projection and coordinate system of maps, rasters and matrixes the opportunity to choose parameters of projection, a Datum and spheroid from lists of parameters in XML format is added. 4). In the task "Navigator 3D" opportunities of customizing parameters of displaying 3D-model are expanded. 5). The the task "Load DigitalGlobe images" is modified. Expanded a number of accessible sanctions of images up to 0.3 meters on a point for loading high-precision images. Function of formation of the full list of the images which are available on a server, on the chosen area is added. 6). The the task "Import of way-points and routes OziExplorer" for an execution of simultaneous loading of list of GPS files is modified. There is added the opportunity of saving in semantics of created objects of time of creating object from a file *.plt, a name of a file and the service information. 1). The list of supported standard spheroids is expanded up to 44 kinds. 2). The error of editing objects on multisheet maps is corrected, it was appeared in version 11.4.1. 3). Support of work of a complex of Geodesy tasks on a network key (floating license) is added. 1). The task Map Computer is modified. In dialog of displaying the area profile there are added the fields of degree of slope in per mille, accepted in designing and construction, and also displaying the values Z offset in the first, current and last points of a profile necessary for mutual appearance of points. 2). Task "Load DigitalGlobe images" is modified. The choice of loaded area on the specified geodetic coordinates entered from the keyboard or chosen on a map is possible. Reliability of procedure of copying images is increased due to the automatic skip of sections on which there are no requested data. Calling the task is duplicated in the menu File\Import from WEB. 3). Dialogues of viewing semantics of objects are modified. If the semantics contains URL-references to the data in the web, then by double click on the appropriate line for viewing data the web-browser is called. 4). Procedure for copying a large number of objects through the clipboard is accelerated. 5). Procedures for control of vector map quality are specified. 1). Support of the international division and system of nomenclatures for maps in projection UTM on various spheroids is added. At creation of maps in UTM projection with standard frames you can choose the standard or arbitrary nomenclature is possible. At input of the standard nomenclature in view of the scale (N-37, N-37-001, etc.) geodetic and flat coordinates of sheet corners are automatically calculated . 2). Task of automatic construction of a set of maps sheets onto the preset territory is modified. Support of maps in UTM projection in the international division is added. Automatic calculation of coordinates of frame corners and points of a break and formation of nomenclatures is provided. 3). The task Map Legend is modified. The mode " Map view reconcile " is added. Allows you to change structure of displayed objects of a map according to the chosen structure of layers and objects in a tree of the Classifier (Map bookmark). 4). Support of a projection Lambert azimuthal equal-area (normal, oblique and equatorial) for all kinds of spheroids in GIS is added. 5). Complex of geodesy tasks is modified. The new mode is developed "Print TECHNICAL PLAN BUILDINGS". Formation of the report is made in accordance with the requirements for preparing the technical plan of the building, approved by Decree of the Ministry of Economic Development of Russian Federation ¹ 403 dated September 1, 2010. Perhaps the formation of report for the single selected object or component of a set - multicontour building.Updated documentation on the use of modes of GIS Map 2011 in solving land-plan.The document is called "Land-plan.doc" and includes a description of the preparation and automated formation of three types of reports: 6). Tasks of import and export of format OGC GML are modified.New edition of export allows to form a tag of semantics in the form of number or a key of semantics. The task of importing includes the following features: change of format of the metrics elements YX or XY (for CAD), recognition of not cartographical tags of the metrics (gmlMultiPoint, gmlArc, gmlCircle, gmlArcByBulge, gmlArcByCenter, gmlArcString, gmlArcStringByBulge), file processing with dual nesting of a tag (used in Autocad 2007 and higher ), processing the arbitrary named tag, estimation of file contents (a preview of object: for estimation of coordinates format, an informative tag of the metrics, if there are several), processing objects with a mixed or incorrect type (ability to install a filter by type of created objects). 1). Task "Loading images of DigitalGlobe" is modified. New function of selecting a layer of images is added, allowing to choose the size, date and main parameters of images; the list of available resolution of images up to 0.4 meters per point point is expanded, sorting of the images list over years is added, the interface of the user is improved. 2). The task " Import rasters from OGC WMS servers " is modified. Is p rovided support for WMS protocol of versions 1.3.0, 1.1.1 and 1.1.0 on the basis of standard OGS Web MapService Interface. 3). The task "Map cutting by selected objects" is modified. Optimization by speed of processing is added. The greatest acceleration is manifested when cutting objects with a large number of points ( more than 100 000) for two or more selected objects. 4). Refined task " Creation of mathematical basis " to support the construction of cartographic grids on the maps of scale larger than 1: 10 000. 1). In the task Map Editor a mode "Common border" is added. Allows to form the common external border for group of selected objects . It is useful, for example for editing the map loaded from the Polish format. As a rule, in such map more polygons are divided into the irregular sites uncoordinated among themselves. Other example - formation of polygon "Subject of the Russian Federation " from set of polygons "Administrative region". The same task can be solved by a merge of all united polygons, however due to automatic selection of only boundary polygons the new mode works in this case much more quickly. 2). Support of direct reading of files of format TIFF and display together with vector maps, matrixes and rasters is added. Into the task "Loading raster data" an option "Not copy source image in RSW-file" is added, at which choice the TIF-files are opened without transformation to RSW format. This mode of opening allows to reduce significantly time spent for opening uncompressed images and photoplans of the large size. For such TIF-files the visual image (the reduced copy) is automatically formed, which is written into a RSW-file, accelerating display of TIF-files. The rasters loaded into system in the form of TIF-files are processed in the same manner, as well as usual rasters - all operations are available : display, editing, transformation and print with turn. At transformation of a TIF-file the result of transformation is placed into a RSW-file. If necessary of simultaneous opening and viewing the large number of rasters (thousand rasters in total amount of hundred Gigabyte) is recommended to convert rasters into RSW format. 3). Support of work with the atlas of maps through the GIS Server is added. The atlas placed on the GIS Server, should refer to maps, which are placed on the GIS Server. The atlas contains a tree of maps and plans of cities and provides automatic and manual transition between them at scaling and moving the image. Support of the atlas of maps is realized in "GIS Server 2008" version 2.6. 4). In the task Editor of the passport the ability is added for deleting the list of selected map sheets from the passport . Is added the new type of maps the Map of the world and support the Cylindrical Miller projection on sphere EPSG:54003. It is intended for creating maps of the world including the polar regions. 5). Import from DXF format is modified. Is added the ability of a simultaneous choice of many DXF files , their processings on uniform parameters and formations of a uniform map . 6). Refined task of the Map Legend . Documents bookmark is added, which allows you to list the various documents relating to the map. Documents can be united into groups. By the double click of the mouse on the document the program is automatically called for viewing or editing the document in view of the document type. 1). Development of new tasks: Import from GML format and Export to GML format. File of GML format represents the code in XML language, which is formed on the specification and the syntax of the language of the geographical layout OGC GML based on the version 3.2.1. The format is used to transfer map information between geospatial databases of different GIS platforms. The data received in the format of GML represent a tree of nested elements ordered in a specific pattern, which can be represented in a file with XSD extension. 2). Changes in the program of Check of vector map quality: added option for control of duplication of metrics, control of presence of the nodal points of objects on maps without frames. 3). Refined task of Create sheets of map by coordinates, specified the list of created sheets by the specified coordinates. Added support for SC-95. 4). In the task of Map Computer in mode "Buffer zone for marked objects" is added a customization of angles form of zone (straight or rounded) and the degree of smooth of rounded corners. 5). A new task "Creation of map sheets with legendary design by marked objects", which is designed to divide the cards into separate sheets and applying the elements of legendary design created for each sheet. The program is executed in the presence of pre-selected map objects (closed contours - borders). Necessary for the execution of the program a template of legendary design (FRM file) and classifier (RSC file) may be selected from a standard kit that is included in the installation of GIS. 6). In accordance with the Order of the Ministry of Economic Development of Russia N 464, 10.01.2010 "On approval of the creation, renovation, use, storage and distribution of digital navigation maps" the classifiers of digital navigation maps (road10.rsc, road25.rsc) have been updated, which are used to perform work in FTP GLONASS commissioned Rosreestra. 1). Refined set of geodesic tasks: 2). Resolved comments from users of the forum in converters in S57 and navigational maps into the MIF \ MID, updating of TXF, construction of the titles by the semantics, the mapping of labels.
1). Improved Complex of geodesic tasks: 2). Is corrected the error of calculating convergence of meridians for topographic maps to create a new map. 3). Refined the task Graph editor. In the formation of the turn prohibition is added a processing of new semantics of rotation ban for the case where the edges are joint in two nodes. 4). Improved the display of titles. Is provided an extract of the angle of inclination of titles (for zooming), containing two closely spaced points of the metrics. Is corrected an error of displaying vector objects that contain titles. 5). Atlas of maps is modified. Sample of map for display in view of a priority on maps of one scale is corrected. 6). Export of a map to MIF/MID is modified. The angle of an inclination of the vector signs, unloaded as point objects, is corrected.
1). Improved tasks: "Transform vector map"and "Transform raster data":
added the possibility of measuring points in a single-window mode to eliminate minor local differences; the output coordinates can be downloaded from the edge of the sheet, kilometer grid and the selected objects; protocol is created based on computing the parameters of transformation. 2). Refined means of 3D-modeling and displaying models in the task "Navigator 3D". Example of map with 3D-objects loaded from VRML is located in the folder \Data\Cadastre. 3). When you add data from a folder and subfolders are processed
1). Complex of geodesic tasks is improved. Importing data from the exchange file of "realty cadastre" in XML format use the semantics in accordance with the codes in the XML schemas. Is provided a mapping the objects of cadastral registration (blocks, plots and parts of the land and the characteristic points) with a full inventory information. Function of automatic semantics forming is redesigned. Except for a prefix and a number the input of dividers that provides forming designations of points (í1), the ground areas (:ÇÓ1), external contours of a multiplanimetric site (:ÇÓ1 (1)) and parts of the ground areas (:ÇÓ1/÷çó1) are added. 2). Transforming rasters by a set of points task is improved. 3). In the task of import of vector maps from DXF format a multiple selection of files for the formation of a multilayer map is added. 4). Improved interface for user feedback.
1). In parameters of a projection for rasters and matrixes the parameters of user spheroid and Datums are added. All operations of coordinates recalculation and transformation of rasters and matrixes are carried out in view of parameters of a Datum and the user spheroids. 2). Allocation of memory is optimized at opening several thousand rasters and matrixes simultaneously without slowing down display. (2 300 matrixes in volume of 10 GB at displaying a map with shadows (pseudo 3D) occupy less than 0,5 GB memory, all running OS Win XP - less than 800 MB). 3). The new version of the task "Converting projection of a vector map" is developed. The task allows arbitrarily to change a type of a map projection, projection parameters, spheroid and a Datum. For example, it is possible to replace a zone of a topographical map, to go from system of coordinates 63 year to system of coordinates 42 year. The task allows to go from system of coordinates of a topographical map of 95 year to a geographical map in Mercator projection on the spheroid WGS84 and so on. Speed of processing is significantly increased. 4). A new version of tasks "Raster projection reforming" and "Matrix projection reforming". Tasks can arbitrarily change the projection of raster and matrix, projection parameters, spheroid and datum. 5). A new version of the problem "Transform by a set of points" for vector maps. The application includes the following types of coordinate transformations:
Determination of transformation parameters is performed over the coordinates of control points in the source and the output coordinate system. The coordinates of points can be imported from directories of coordinates or measured simultaneously on different maps in the source and output coordinate system. 6). A newer version problem "Transform by a set of points" for raster images. The application includes various types of coordinate transformations:
Are implemented 3 methods of interpolation to fill transformed raster:
Determination of transformation parameters is performed over the coordinates of control points in the source and the output coordinate system. Coordinates of points may be imported from the catalogs of coordinates or measured simultaneously on different maps in the source and the output coordinate system. 7). Application task "Correction of objects metrics" is reworked. Added procedure for "Correct a direction of digitizing contour lines" (right-lower). 8). Implemented display of different types of rasters and matrices on the screen and at printing maps with dynamic rotation and zooming of the image. 9). Reworked the task for import of vector data from format Google Earth (KML). New features of the data processing KML files according OGS KML Version 2.2. Improved the appearance of objects created: added internal contour polygons available in the file KML. 10). Reworked the task for export of vector data into format Google Earth (KML). Advanced the possibilities of unloading data into files KML, according to OGS KML Version 2.2. Improved the appearance of created objects: added internal contour of objects in the files kml; speed of data unloading increased in several times. 11). Reworked the task "View maps on the background of Google images". Ability is added for the task to work through a proxy server, indicating the parameters of (IP-address, port, user name, password). 12). In the list of rasters added ability to set the border of rasters visibility area by selected objects. To do this on the map you must select polygon or linear closed objects. In the dialog Rasters list (menu View \ Rasters list ) to choose RASTERS branch. Then click on the Properties button, in the menu that appears, select Set border by map object. 13). Reworked the task of importing matrix heights from files of GRD format and text files (ASCII). Supports the import of data with the binding and the size of the element on the ground in meters or degrees. For the data in degrees the matrix is created in the projection Latitude\Longitude, that allows it in the further correctly to transform to any projection and system of coordinates. 14). Reworked the task of building height matrix of vector maps. Added support for maps in geodetic coordinate system and taking into account the current parameters of the projection of the document. This allows you to build a matrix of any projections that differ from the projections of the source data. 15). Reworked classifiers to maintain a single electronic cartographic base and to display the cadastral information on cadastral maps (map500.rsc, map2000.rsc, survey.rsc). In classifiers added new types of attributes (status of the object, cadastral value, information on encumbrances and other) for objects of land-surveying and made changes in the part of information exchange with external databases, geocoding and formation of database queries.
1). Support for three types of maps is provided:
Maps can have arbitrary projection parameters, the parameters of spheroids and datums. All kinds of maps can be displayed and edited on the fly in any projection on any spheroid without prior transformation. Map in geodetic coordinates can be created on any part of the Earth without limitation by length on the latitude. That ensures the creation of the state digital navigation maps in the state system of geodetic coordinates 1995, subject to the Order of the Ministry of Economic Development of Russia from March 30, 2010 N 122 "On approval of the Order of the creation, update, use, storage and distribution of digital navigation maps. 2). Dialog for creating a new map allows you to enter the parameters of projection, an arbitrary spheroid and datum. Multisheets topographic map can be created as a set of individual maps with the restriction of the territory. When you import a list of sheets from the file of type DIR automatically a project MPT is created for uniting the sheets into a single document or creating Multisheets map (MAP - for compatibility with older versions). 3). To quickly change the parameters of displayed projection of a set of vector maps in the Options menu the Current projection item was added. When changing the parameters of the projection, spheroid and datum automatically change the displayed and edited coordinates and map view on the screen. 4). Import / Export of vector maps in formats SXF and TXF supports the exchange of data in geodetic coordinate systems (in radians and degrees) or plane rectangular coordinates (meters). At export it is possible to choose the format of coordinates: meters (for compatibility with older versions of programs and acceleration of processing data), degrees or radians. 5). The task "Sorting maps objects" allows you to change the format for storing the coordinates of vector maps: in meters with an accuracy of 2 characters (centimeters), 3 digits (millimeters) and maximum accuracy, or in radians. 6). Arbitrary number of maps with arbitrary parameters of the projection can be automatically merged into a single map, taking into account the parameters of projections and datums through the menu File \ Update and selecting files SXF, TXF, DIR (list SXF and TXF). 7). Added a new type of map "Latitude / Longitude" and the corresponding cylindrical projection on the ball. Radius of the ball is specified by the major semi-axis of the selected spheroid (21 standard, or arbitrary). 8). A new library of geometric functions and overlay operations can improve the quality and substantially reduce the time of formation of derived maps with cutting along the boundary of arbitrary configuration (along the contour of the city, district, region, country), as well as reduce the time to perform other tasks that contain the control of the metrics of map objects, a search and a cutting objects on a contour of arbitrary configuration. Added the ability to perform output of error messages in the metrics into the log that provides a more informative control at the implementation of overlay operations. At stream processing of objects (cut along the contour that contains from 10000 to 100000 points) is reached the speeding up the operations of more than 10 times. 9). We modified algorithms for building around the objects of zones of improved geometric shapes. In the new implementation is well handled the self-intersection of objects and situations in which the radius of the zone is much higher than the arc length of objects. Created zones have an external contour and sub-objects for all the internal contours of objects. 10). Building a route by a network graph accelerated in several times by updating algorithms. 11). Improved display of various geometric shapes in the printer's form through the use of anti-aliasing. All kinds of objects can dynamically change the color in the presence of the service semantics Color of the object (31002) in the format of RGB (formerly supported only for titles and point symbols). Examples on the map \ Data \ Shape. 12). Added support for the two algorithms for calculating area and length. In the Options menu the item was added Precise square and length. With its choice the calculation is performed after converting the coordinates of the object to the the projection of topographical map relative to the mean meridian of each segment (for length) or size of the object (for area). Otherwise - the calculation is performed by the existing coordinates of the object in the projection of the map. 13). To accelerate processing of elevations matrixes and minimize distortions the import of data from SRTM format is carried out in a projection "Latitude / Longitude". The loaded matrixes can be merged and transformed to any projection. 14). A new task Summ elevation matrixes for selected objects with projections transforming is developed. The task merges and transforms elevation matrixes within the limits of the map polygons (boundaries of areas). The input data of the task is the folder with the elevation matrixes that can be loaded from external formats (GeoTIFF, HGT, TXT, GRD, DBF) by using menu item File \ Import raster or matrix from. The input matrix can have any projections and datums. 15). Enhanced properties of raster and matrix data storage with different resolution in height (latitude) and width (longitude), updated the import of remote sensing data from different formats. 16). To connect to services of mapping Earth Remote Sensing Data in the View menu the item was added External resources to choose the connecting to Google or Kosmosnimki.ru. For users who are registered in the company Digital Globe, the applied task "Download images of Digital Globe" is added, that simplify the selection of remote sensing data for any area on the background of open maps, rasters or matrices. The volume of data available depends on the user subscription to the appropriate resources. 17). Reworked the task View maps on the background of Google images. Added algorithm for loading data with matching tiles of server with a different resolution of the selected area in a raster, thus, for each section the data with the highest resolution are selected. Increased speed of the program. The user interface (choice of viewing area and input of parameters) is improved. Added function of load data on the selected objects. 18). Reworked the task "Navigator 3D". Accuracy of mapping objects and terrain in the background is increased. In the "Move by object" mode we add cyclic motion of the object in the forward and reverse direction. 19). Reworked the task "Map Editor". In group of modes "Elevation" added a new mode "Adding height to the metrics of selected object. In the presence of elevation matrix or model (TIN, MTD-model(LAS)) in the specified point the value of altitude is determined by interpolation of the closest elements of the matrix or model. In the absence of the matrix the computation is performed by treating the objects with 3D - metric or the value of "height" in the semantic description. In the presence of the selected objects on the map at the time of the mode activation the processing can be performed for all selected objects. 20). Improved block of geodesy tasks. Are made changes to the process of "Land - plan" for the changed ground sections. This is the former common section (land-use), consisting of several external contours (a set of objects). Now the program at filling the section "Information on the changes in land areas and their parts" considers the external contours of multicontour land section as parts of the land section. As the designation of parts (external contours) semantics is used, "Account number of part." Error of forming the land-plan for an improved land, which has several internal contours (sub-objects) is corrected. Added ability to insert "Information on the measurements and calculations" not only for the primary (first) contour plot, but for the external contours of multicontour formed or refined plot. Is corrected the error of calculating the maximum permissible error in determining the area of multicontour land in section "Information on the generated plots and their parts" property ". 4 Overview of formed plots". Changes are made in the mode of forming the scheme of plot for several selected sites in the part of through-numbering of new points and placement of titles. Eliminated duplication and gaps in through-numbering of the points. In the mode "Import from another project," added import of new parameters required for the operation of mode "Land-plan"(a reference to the table "catalog of coordinate "and "accounting data", the sign of the local coordinate system, the name of the local coordinate system, and sign of creating a set of objects for stations: the point name, angle, height, coordinates). 21). For the convenience of viewing and editing of information from external databases we add a mode "Request of data from the database for the object". When an object is selected, automatically will be made a search for record in the open project of the tasks Database and displaying the form with the data from record. If the records is not present, then opens a form with empty fields that can be edited and saved in the table. Link method of the object and record in the table is defined in the project options (by number of object, by matching the values and semantics of database fields). 22). Reworked task "Atlas map". Added ability to set lower and upper bounds to automatically switch between different maps when zooming an image. To activate the transition between maps the menu item is added "Window/Automatic switch". 23). In the task Map Legend added the ability to use color for several ranges of matrixes of elevations and qualities. For the convenience of data management in the map tree on the tab Map is added the possibility of combining the individual maps into the group. For the convenience of managing by a set of maps with the common classifier is added support for a single legend with all the available or visible objects on several maps. 24). A new task "Import data from GPX format" is developed, based on the document "GPX 1.1 Schema Documentation". GPX (GPS Exchange Format) - a text-based format for storing and exchange of GPS data, is a subset of XML. Format allows you to store information about reference points (waypoints), routes (routes) and tracks (tracklogs). 25). A new task is created "Export navigational maps to MIF\MID format" for the formation of public navigational maps for the road transport in formats SXF and MIF\MID pursuant to the Order of the Ministry of Economic Development of Russia from March 30, 2010 N 122 "On approval of the creation, renovation, use, storage and distribution of digital navigation maps". 26). Reworked the task "Calculating the values of semantics for incoming objects". This task allows you to perform analysis of the distribution of a given group of objects within the selected polygons (area objects) and fill in the semantic characteristics of polygons by the results of analysis. In analyzing the distribution of objects in polygons at the same time can be filled with up to five characteristics of each polygon. Values of the characteristics of polygons are defined on the base of the values aggregate of the characteristics for objects, included in whole or in part in polygons. In this case are calculated the following factors: - the total value of the specified characteristics of objects within each polygon; - the average value of characteristics of objects within each polygon; - the minimum value of the specified characteristics of objects within each polygon; - the maximum value of the specified characteristics of objects within each polygon; - the number of objects within each polygon. 27). Further developed procedure for constructing maps of rule (division) of nomenclature sheets. Now you can automatically generate DIR - file for a list of nomenclatures of built rule. In addition to choice of scale of nomenclature sheets of the created rule the ability is appeared to choose a scale of create map of rule. This is convenient if onto one map the rule of nomenclature sheets of different scales is put. Now you can build a rule of nomenclature sheets of local (geographical and rectangular) coordinate system (LCS) in accordance with the "Basic provisions on the use of local coordinate systems when working on state land cadastre, land monitoring and land-management" with the ability to automatically calculate the nomenclatures and parameters of shift the LCS relative to the state coordinate system . Now you can sign partially a sheet of nomenclature (the last digit of nomenclature), it is a convenient, if onto one map is put a rule of nomenclature sheets of different scales. Now you can define how to sign nomenclatures of sheets, in which there are Roman numerals. The title of nomenclature is formed in a standard way (not a code, as before), but into the semantics is written and the nomenclature and code of nomenclature. 28). Refined procedure for constructing the legendary design of the task of preparing maps for print. Added the ability to build legendary design of nomenclature sheet of map without turning the frame, which can be used to create photomap and other special maps. 29). Reworked task of Correction of objects metrics (tasks group Control and correction of data). Changed interface, performed procedures are grouped into tabs. 30). Redesigned toolbar buttons and increased their size. 31). Made changes into Classifier of digital navigation maps of scales 1:25 000, 1:50 000, 1:100 000, and into a library of conventional symbols (road25.rsc), designed to create maps in the FTP GLONASS. Expanded the list of semantic characteristics of the road graph and classifier of semantics values. 32). Expanded and upgraded the composition of the sample of applications for GIS Map 2011 - sdk11.zip. Available on our download page. For applications designed in PanTask, are supported arbitrary (not repeated within the problem itself) IDs of button on the taskbar. Earlier IDs for buttons of different tasks could not be repeated. 33). In the task Check of map is added the processing of new types of maps and projection parameters. Added an option to interrupt the control when reached a given number of errors on the map. 34). In the task Merging sheets added a processing of new types of maps (user maps, limited by frame) in conjunction with the multi-sheet maps (MAP). 35). On the menu File\New is added the choice of the type of created map - Vector map (SIT) or Multisheet map (MAP) for compatibility with older versions. 36). Changes to the program for the operation with the option "Data Execution Prevention (DEP)". Previously, this option should be off. 37). In the Edit menu the Restore item was added to undo the last "Undo" command. Restore command can be executed many times, how many times it has consistently were done Undo commands. For each Restore command is asked a question about the name of the restored operation (Move objects, deleting, etc.). Supported an abolition and restoration of complex transactions, handled any number of objects in one operation.
1). In the parameters for the projection of images and templates added custom parameters ellipsoid and datum. All operations of the coordinate conversion and transformation of raster and matrices are performed within the parameters and custom datum ellipsoids. 2). Optimize the allocation of memory when opening several thousand images and templates simultaneously without slowing down display. (2300 matrix volume of 10 GB when the map with shadows (pseudo 3D) occupy less than 0.5 GB of memory, all running Win XP - at least 800 MB). 3). A new version of the problem "transform the projection of a vector map. The task can arbitrarily change the projection maps, the parameters of the projection, ellipsoid and datum. For example, you can change the zone of topographic maps, to move from the coordinate system in 1963 to coordinate system in 1942. The challenge allows us to pass from the coordinate system of topographic maps in 1995 for an overview and a map in the Mercator projection on the ellipsoid WGS84, and so on. Processing speed significantly increased. 4). A new version of the problem "Transformation of raster projection" and "transform the projection matrix. Tasks can arbitrarily change the projection of raster and matrix, projection parameters, ellipsoid and datum. When filling out a new height matrix triangulation method is used to determine the height of each point, which allows smooth strains produced during the transformation. 5). A new version of the problem "transform on a set of points" for vector maps. The application includes the following types of coordinate transformations:
Determination of transformation parameters is performed over the coordinates of control points in the source and the output coordinate system. The coordinates of points can be imported from directory coordinate or measured simultaneously on different cards in the source and target coordinate system. 6). A new version of the problem "transform on a set of points" for raster images. The application includes various types of coordinate transformations:
Implemented 3 methods interoplyatsii to fill transformed raster:
Determination of transformation parameters is performed over the coordinates of control points in the source and the output coordinate system. The coordinates of points can be imported from directory coordinate or measured simultaneously on different cards in the source and target coordinate system. 7). The constructive application problem "Correction metric objects." Added procedure "Correct digitizing contour lines (right, below). Right Direction digitizing contours provides the correct location of signatures elevation contours (in accordance with the direction of slope) at their automated formation. 8). Implemented display of different types of images and matrices on the screen and printed maps with dynamic rotation and zooming of the image. 9). The constructive task import vector data format from Google Earth (KML). New features of the data KML files according OGS KML Version 2.2. Improved the appearance of objects created: added internal contour polygons available in the file KML. 10). The constructive task of export vector data in a format Google Earth (KML). The possibilities of discharge data files KML, according to OGS KML Version 2.2. Improved appearance created objects: the internal contour of the objects added to the files kml; speed data unloading increased several times. 11). The constructive task "View maps on the background image Google". Ability to work the problem through a proxy server, indicating the parameters of (IP-address, port, user name, password). 12). In the list of images added ability to set the framework scope images of selected objects. To do this on the map to provide areal or linear closed objects. In the dialog list rasters (View menu \ List of images) to choose a branch of the raster. Then click on the Properties button in the menu that appears, select Install the frame on the object map. 13). The constructive task of importing matrix heights of the GRD file format and text files (ASCII). Supports import of data with the binding and the size of the element on the ground in meters or degrees. For the data in degrees of the matrix is created in the projection Latitude \ Longitude, which allows it to continue to correctly convert any projection and coordinate system. 14). Is modified problem of constructing a matrix of heights on vector maps. Added support for maps in geodetic coordinate system and taking into account the current parameters of the projection of the document. This allows you to build a matrix of any projections that differ from the projections of the source data. For example, you can open any number of topographic maps in geodetic coordinates, and construct a matrix of projection latitude \ longitude (as in SRTM), a Mercator projection or local coordinates, which are set in the Options menu \ Current projection parameters. 15). Remaked classifiers to maintain a single electronic cartographic base and to display the inventory information on cadastral maps (map500.rsc, map2000.rsc, survey.rsc). In classifiers added new types of attributes (status of the object, cadastral value, information on encumbrances and other) land for facilities and changes in part of information exchange with external databases, geocoding and formation of database queries.
1). In the map passport the support of local systems of coordinates is added on the basis of UTM projection (Gauss-Kruger) with the specifying of latitude and of a longitude of the main point (coordinates of the center in GCS), of displacement of the center in LCS (coordinates of the center in LCS), of scale of an axial meridian and an angle of a turn of axes in the main point. The new type of a map - Topographical local is entered. Recalculation of coordinates by all set of parameters in LCS can dynamically be carried out for any map. The list of supported ellipsoids is expanded up to 21 kinds. 2). In the task of transformation of topographical maps into local coordinates system by the specified parameters the support of back transformation from LCS into a topographical map (GCS) LCS is added. 3). In the task «Geodesy calculations» at formation of the scheme for the land-plan the opportunity of formation of through numbers of new points is provided. 4). Support of mapping and display of multisheet OLE-objects (Word document from several pages) is added. 5). Task Placing of a map by two points is modified. Support of coordinates of control points in CS-95 in meters or degrees and in EP-90.02 in degrees is added. 6). Into a mode Calculations by semantics of the marked objects in the Map Editor the functions for inquiry of coordinates of the first point of object in meters or radians are added. The requested value can be used in various calculations and at the automated formation and updating of values of semantic characteristics (attributes) which can be used for formation of various titles on a map. 7). In examples of maps the example of the plan of a floor with the put sizes of building's elements for BTI is added.
1). Map Editor task is modified. 2). In the Classifier Editor the opportunity of input of long names (up to 1024 symbols UNICODE) of layers, objects, semantics is added. Long names are applied to display of names in various dialogs of the GIS and formation of the report on the classifier in Word format. 3). Applied tasks: Creation of diagram or graph, Creation of thematic map, Construction of thematic diagrams are modified. 4). The changes into the mechanism of updating of data on coordinates of stations at calculation of several theodolitic courses and adjustment of a polygonal course are made in the task «Geodesy calculations». At repeated calculation of a course (a part of a polygonometry), being the initial information for other courses (parts), automatic replacement of coordinates of reference points and recalculation of coordinates of all other stations will be done. The opportunity of management by a variant of creation of picket points and their characteristics (a point, a title of name, a title of height) is added at mapping in the form of separate objects or in the form of a uniform set of objects. Recording into semantics of picket of its field code (a key of object) is added. 5). Converter of import of data from format DGN (MicroStation) is modified. 6). The new mode of building a matrix of a surface is added (a matrix of qualities MTQ or matrixes of heights MTW) - to build "Inside subjects of square object". The mode allows to construct the matrix containing some of separate filled areas. 7). Map Legend task is modified. 8). Atlas of map task is modified. 9). At installation of the new version the saving the list of the user tasks into MAPTASK.INI is provided.
1). For the conventional sign, displayed from the BMP file, added property Transparent background. When setting this property does not appear the color belonging to a point in the lower left corner of the picture. 2). Refined task of constructing thematic maps from database tables. In the Data tab the option to configure a connection to the database Paradox, MS SQL Server, Oracle, ODBC, OLE DB Provider is added. 3). Refined task Atlas of maps. Changed interface of dialogue for work with map tree, raster and matrix, added support for project of maps (mpt) for quick transition between different projects, added information panel on the map in the map tree (Parameters). 4). Refined task import data from DXF. Added loading of data in a custom two-dimensional coordinate system with an arbitrary point of origin (UCS). 5). Added to the SDK sample of library of custom conventional signs, developed in Delphi (SDK\Ready\ImlApi\MyIML.PAS\).
1). Supporting Parameters of the Earth PZ-90.02 instead of PZ-90 is added at recalculations of coordinates between different systems for an ensuring of reception of data from navigating receivers GLONASS according to the Order of Government of Russian Federation from June, 20th, 2007 ¹ 797-p. Position of the points received from GPS (WGS-84), in CS-95 (CS-42) (Coordinate System-42) has changed within the limits of 0.5 meters, position of the points received from GLONASS (PZ-90.02), in CS-95 (CS-42) has changed within the limits of 2-3 meters (in comparison with PZ-90) on the European part of the Russian Federation. 2). Import of a cloud of dots (laser measurements) from LAS format is added. Open binary format LAS is intended for storage of records of the dots received by means of locators LIDAR (light detection and ranging), used for sounding thickness of the sea, a sea and terrestrial surface, an atmosphere. 3). The new task - Map creation in local coordinate system - is added. The task is intended for creation of a map in local coordinate system (LCS) on the basis of the open map supporting recalculation to geodetic coordinates. Again created map has the Large-scale plan type and contains objects with coordinates of the metrics in LCS. Construction of the large-scale plan in local system of coordinates is carried out according to parameters of recalculation in LCS. Start of a task from menu Tools\Run Application\Data transformation\Conversion of a map in LCS. 3). In the Check of vector map task in the control of topology of linear objects the number of given messages for points of joining is reduced.
1). Support of local coordinate systems is added (LCS) at work with the maps supporting geodetic systems of coordinates (CS42, CS95, CS63, UTM/WGS84 and others) for viewing and editing the coordinates in LCS and automated formation of the land-management documentation in LCS. For switching coordinates into specified LCS on an any map it is necessary to set parameters of LCS in menu Options\Local coordinate system. Parameters of LCS can be set concerning various base systems, including, by the indication of the letter of zone CS-63 and the displacement of coordinates defined by any point, specified for two systems. At formation of Land-plan it is possible to choose system of coordinates of a map or LCS, that allows to execute requirements of Federal Agency of a cadastre of objects of the realty about transition onto LCS at conducting the state cadastre of the realty. The attribute of use of "LCS" is installed in options of "Geodesy editor", in dialogue "Parameters of the project for a geodesy and the land-surveying documentation" on page "Format of the data". Use LCS is realized in modes: "Land-plan", " Description of the ground area", "Land Surveying". 2). Export of a vector map to Excel table (XLS) is added. A call through menu File\Export to...\Data in table. 3). The interface of the Map Legend task is modified for management of visibility of objects, maps, rasters and matrixes, search of objects, viewing of classifiers and other problems. 4). The new task for the automated construction of a set of sheets of the large-scale plan (plane-tablet sheets) onto preset area is added. Start from menu File\New\Plan Sheets. 5). Map Editor task is modified. 6). New classifiers are developed: agro10t.rsc (for maps-schemes agricultural grounds, passports of fields, etc.), emercom.rsc (for the Ministry of Emergency Measures according to requirements of GOST 22.0.10-96), geology.rsc (for preparation and formation of engineering drawings at an execution of engineering-geological researches according to GOST 21.302-96), gradserv.rsc (for conducting a town-planning cadastre), telecomm.rsc (for conducting maps of the telecommunication equipment).
1). In the block of geodetic tasks the formation of land-plan is updated. 2). Creation of titles on semantics of objects task is modified. 3). Graph of roads task is modified. 4). The new converter Import of the graph of roads in GDF format - ISO/DIS 14825 "Intellectual transport systems" - Files of geographical data (GDF) is developed. 5). Correction of metrics of objects task is modified. The mode of transformation of the title text from UNICODE coding into text ANSI is added. 6). The mode of creation of the Topographical plan with an any division in systems of coordinates CS-95,42, UTM \WGS84 is modified.
22.07.09 Version 10.5.1 1). Graphs of roads task is modified. The mode of replacement of a route from bilateral edges onto parallel unilateral edges is added. Between the points specified on a map the shortest route is created. The given route defines a site on which a replacement of network edges will be made. 2). Converter into DXF format is modified. The opportunity of formation of separate layers onto each kind of object on a map is added. The name of a layer is formed by value of field: Key (a short name) of object in the classifier of a map (RSC). 3). The new converter is developed for import of objects of vector maps from Excel format. A call is made through menu: File\Import from\Excel files with position data. 4). Into File\Update menu the support of Excel files for updating or additions of semantics of map objects from Excel table is added. Connection of map objects with the table is carried out by the preset field of Excel table containing number of object or unique value of the specified characteristic of map object. 5). The classifier of digital plans of cities map10000.rsc is updated.
30.06.09 Version 10.5.0 1). In the block of geodetic tasks the formation of "Land-plan" for two packages of office programs is realized: 2). Map Legend task is modified. Controls by matrixes and rasters in the document are added. In the menu by the right button it is possible to close a matrix or raster map in the document, to add it into the document, to change parameters of a matrix or raster map (modes: Matrix image, Projection parameters, etc.) and also to operate visibility of a map in structure of the document. 3). The converter into DXF format is modified. The option is added: Y without zonal number (for WGS, CS-42, CS-95) for formation of Y coordinate in DXF without number of a zone. 4). Map Editor task is modified. Into the Mark panel the mode of specifying a method of displaying the metrics of object in the form of a spline - a polyline or a circumflex spline is added. The choice of a method of inverting assumes, that the method of display of a contour of object will change onto opposite (a polyline onto a spline and on the contrary).
21.05.09 Version 10.4.1 1). The opportunity of setting of nonregular diapasons of a qualities matrix palette is added. The palette of a matrix of qualities contains the colors corresponding to diapasons of values of the quality's characteristic. 2). Into the tasks panel of Map Editor into Set group the mode of association of objects and their signatures into group by semantics is added. The selected objects which contain Name of object semantics and the titles with the same texts are considered. 3). The new converter: Export of the graph of roads into GDF is developed. It is intended for the import of the graph of roads created in the Graphs of roads task, to format of GDF(ISO/DIS 14825) of versions 3 and 4. 4). The new task: Calculating semantics by incoming objects is developed. 5). The user's guide on formation of the surveying plan (MejPlan.doc) is modified. Patterns of documents for reports are updated.
1). Geodesy editor task is modified. The user's guide on formation of the surveying plan (MejPlan.doc) is modified. 2). Graph of roads task is modified. The mode for formation of interdictions of turns and U-turns is added in the form of the table of transitions on crossroads. 3). New task "Classifier translating" is developed, intended for automation of translation of names of layers, objects, semantics and classifiers of semantics from one language onto another. Start of the task is carried out from the main menu Tools\Run Applications\Classifier processing\Classifier translating. 4). GPS\GLONASS monitor task is modified. Processing of the receiver Garmin GPSmap 76 CS (connection through USB) is added. There are provided reading from the device of Way points, routes, trackLog' à , work in the ALMANAC mode and record onto the device of the selected point objects. 5). Support of S57 format is considerably improved: 6). Map Legend task is modified. Displaying of the maps list is added on the Classifier bookmark. It is added the opportunity to close the user map in the document, to add it into the document, to change parameters of the user map (modes: Edit, Select object, Object contents, etc.) and also to operate visibility of the user map in structure of the document (a pop-up menu by the right mouse button above the list of maps). 7). The opportunity of opening on the GIS Server 2008 (versions 1.1.4 and later) of the project of data (MPT) is added, including the list of maps, rasters and matrixes. 8). In the Construction of coordinate grid task the opportunity of constructions of a geodetic network in SC95 (earlier in SC 42 and WGS84) is added. 9). In import of TIFF files the processing of algorithm of compression FAX CCITT Group 3 is added. 10). In an applied task Editing of the objects metrics the mode of a turn of axes of objects coordinates (To change X <-> Y) is added. The mode can be applied for processing the maps imported from exchange formats, in which axes of coordinates have not a cartographical direction (X - upwards, Y - to the right). 11). Classifiers for digital navigation maps and plans of the cities created under GLONASS program are updated (Road10.rsc, Road25.rsc, Map10000.rsc). 12). It is updated SDK, source texts of the project mapscena.dll (gisdlgs.dll) are published, including standard dialogues for various tasks (Builder C ++).
|
|||
| Products | Tehnology | Download | Price | Forum | Items | Education | Contact | About |
|
|||
| Copyright © Panorama Group 1991-2012 |
||||
